After the home consumer wood floors installed, often in a hurry to move into the home with the home , not knowing that this follow-up inspection is very important. Strengthen consistent parquet flooring and processes in the pavement area. Currently, more common on the market approach is suspended pavement .

First, the primary treatment

The first step in paving the floor work is the primary treatment . Primary treatment mainly for sand , tide, concave, convex , crack , the five issues were ground , on the ground to fix the problem , the formation of a new grassroots , grassroots hollowing and avoid the original floor cracks caused by bagging .

Second, leveling the ground

After doing the grassroots level , the need for leveling the ground . If the ground is not flat, there is a gap not only lead to the baseboard , the overall floor will be uneven , and there abnormal sound, but also seriously affect the quality of the floor .

Self-leveling construction is currently on the market, a more advanced ground construction technology, which can guarantee the height difference between the ground every two square meters within the original scope of no more than 3 mm. During construction , workers will be a variety of materials mixed with water into a liquid substance , after it was poured into the ground , the liquid material flow according to homeopathic uneven ground , on the ground for automatic leveling and quickly dried , cured the ground will form a smooth, flat , seamless new grass.

Self-leveling floor can make more smooth , ensure quietness of the floor. At the same time , it will make the ground more firmly to avoid arching beneath the floor. In addition, to ensure that no air barrier between the ground and the floor , increasing the thermal conductivity of the ground. If you do a general leveling cement , cement sure to set aside time to fully dry. There can not be installed when the ground moisture . Measuring moisture there a simple way , with a 60 cm square of plastic film covering on the ground , surrounded by sealing membrane was observed after 24 hours anhydrous gas, if the film has a water vapor can not be installed , in addition, if the ground every meters of height difference more than 5 mm , it can not be installed.

Posted by: qizhenkim at 07:26 AM | No Comments | Add Comment
Post contains 426 words, total size 3 kb.